"The project was completed on time and on budget" - Builder

Ritek XL Thermal Wall®

The Ritek Thermal Wall® System is delivered complete with a high performance thermal insulation layer bonded to the inside of the panel, saving valuable floor space.

For exterior walls, Ritek XL Thermal Wall® is manufactured specifically to your architect’s drawings, with built-in insulation allowing for a high thermal rating of up to R-value 4.8. No need for additional trades and materials in providing insulation, batten and lining while achieving BCA thermal, fire and sound transfer specifications.

Our in-house drafting team custom manufacture the panels to your architect’s specification to ensure the Ritek XL Thermal Wall® is delivered to your site prefabricated, and ready to install. Electrical and gas services can be cast in. Windows and fire doorframes can be pre-installed.

Suitable for use in single residential, multi-storey residential and commercial buildings as load bearing/structural walls up to 25 stories or higher in non-load-bearing capacities.

HIGHLIGHTS

  • No need for additional trades and materials in providing insulation, batten and lining while achieving BCA thermal, fire and sound transfer specifications.
  • The smooth sanded finish provide wall surfaces that are ready for direct setting by your finishing trades to a level four finish.
  • Water drip is reduced through the rebated track providing floor-to-floor detail and ensuring precise alignment.

Key Features & Benefits

Brick & Block users

  • Faster to erect than traditional block and brickwork. With the potential to save days per floor on construction. That’s time you don’t have to pay for.
  • The Ritek® Thermal Wall sanded surface is ready for direct setting by your finishing trades to a level four finish, this removes the cost and time to batten out and plaster line internal walls speeding project completion
  • Water drip is directed away from the building through the rebated track providing floor-to-floor detail and ensuring precise alignment.
READ MORE

PFW users

  • Cast in thermal insulation, no need for additional trades and materials in providing insulation, batten and lining while achieving BCA thermal, fire and sound transfer specifications.
  • The Ritek® Thermal Wall sanded surface is ready for direct setting by your finishing trades to a level four finish, this removes the cost and time to batten out and plaster line internal walls speeding project completion
  • Water drip is directed away from the building through the rebated track providing floor-to-floor detail and ensuring precise alignment.
READ MORE

Brick & Block users

  • Cast in thermal insulation, offers additional floor space up to 15m2 per 100m compared to traditional brick and block.
  • The Ritek® XL Wall sanded surface is ready for direct setting by your finishing trades to a level four finish.
  • Water drip is directed away from the building through the rebated track providing floor-to-floor detail and ensuring precise alignment.
READ MORE

PFW users

  • Cast in thermal insulation, offers additional floor space up to 8m2 per 100m2 compared to traditional permanent formwork.
  • The Ritek® XL Wall sanded surface is ready for direct setting by your finishing trades to a level four finish.
  • Water drip is directed away from the building through the rebated track providing floor-to-floor detail and ensuring precise alignment.
READ MORE

Brick & Block users

  • Increased profit opportunity as Cast in thermal insulation, offers additional floor space up to 15m2 per 100m compared to traditional brick and block.
  • Faster to erect than traditional block and brickwork. With the potential to save days per floor on construction. That’s time you don’t have to pay for.
  • The Ritek® XL Wall sanded surface is ready for direct setting by your finishing trades to a level four finish, this removes the cost and time to batten out and plaster line internal walls speeding project completion.
READ MORE

PFW users

  • Increased profit opportunity as Cast in thermal insulation, offers additional floor space up to 8m2 per 100m compared to traditional permanent formwork.
  • The Ritek® XL Wall sanded surface is ready for direct setting by your finishing trades to a level four finish, this removes the cost and time to batten out and plaster line internal walls speeding project completion.
  • Pre-cast windows provide the opportunity for lock up sooner.
READ MORE

Wall System Specification

Ritek® XL Wall System Specification
all Panel Thickness Concrete Core Surface Density
(Core Filled)
Typical Panel Weight
135mm to 265mm 95mm to 225mm > 220 kg/m2 22 kg/m2 to 28 kg/m2
Panel Components 6mm Fibre Cement Sheeting bonded to a Patented Composite Aluminium and ABS Stud. All aluminium components and accessories are protected by chromate coating.
Internal Finish Set joints and apply a standard paint finish (Level 4).
External Finish Set joints and apply a standard texture coating system finish.
Horizontal steel reinforcing bars can be placed at 175 and 350 centres in accordance with the maximum centre to centre spacing of AS 3600-2009.